Home > Products > Motherboard

GA-8IRXP

 
CPU
  1. Socket 478 Intel® Micro FC-PGA2 Pentium® 4
  2. CPU Vcore: 1.1V to 1.85V 30 scales setting by BIOS
  3. CPU Host Frequency: 100~200MHz setting from BIOS
  4. CPU multiplier: 8, 9...24 setting from BIOS
  5. 400 MHz FSB
Chipset North Bridge:
  1. Intel® 845 / ICH2
  2. ITE I/O chip and Winbond Smart @I/O chip
  3. Creative CT5880 5.1-channel
  4. NEC USB 2.0 chip, Promise ATA133 w/ RAID chip and Intel® 82562ET LAN PHY
Memory
  1. 3 x 184-pin DDR DIMMs support up to 2GB of DDR 200/266 memory
  2. DDR frequence overclock setting from BIOS (based on Host/DRAM clock ratio)
  3. DDR over voltage setting (2.5V~2.8V) from BIOS
  4. Supports 64 bits data interface, 2.5V DIMM DRAM and ECC DIMM
Expansion Slots
  1. 6 x PCI slots (PCI 2.2 compliant)
  2. AGP over-voltage setting 1.5V~1.8V from BIOS
  3. 1 x AGP 4x (1.5V only) & AGP 2.0 compliant Read first!!
  4. 1 x CNR (Communication Network Riser) slot
H/W Monitoring
  1. CPU/System fan revolution detect; CPU fan control
  2. CPU overheating warning
  3. System voltage detection
BIOS
  1. FWH(Firm Ware Hub) BIOS with enhanced ACPI feature for PC98/Win98/Me/Win2000/XP compliance, Green, PnP, DMI, INT13 (>8.4GB) & Anti-Virus functions
  2. Supports Multi-language BIOS, DualBIOS™ , @BIOS™ and Q-Flash utility
  3. Auto-detect & report system health status
  4. IDE#1~#2, SCSI, LS120, ZIP and CD-ROM bootable
Unique Features
  1. Suspend-To-RAM (STR) & Wake-On-LAN (WOL)
  2. Internal/External Modem Ring on
  3. Poly fuse for keyboard overcurrent protection
Bundle Software
  1. GIGABYTE Windows Utility Manager
Power
  1. Power-off by Windows® 98/Me/2000/NT/XP shut down & switch
  2. Supports USB device wake-up
  3. Power-on by LAN, RTC, Modem & Switch
  4. ATX power connector and ATX 12V connector
Form Factor
  1. ATX, 4 layers PCB, 305mm x 244mm
Driver
  1. CT5880 audio driver; Intel®LAN driver, Promise ATA133/RAID driver, USB 2.0 driver
  2. Intel® LDCM® utility, Intel® IAA driver
I/O
  1. IDE 3, IDE4 provide RAID 0 or 1 with ATA133/100 Bus Master operation mode
  2. IDE1, IDE2 provide IDE HDD/CD-ROM with PIO mode 3,4 and Bus Master (Ultra DMA33/ATA66/ATA100) operation mode
  3. 1 x FDD, 2 x COM, 1 x LPT, PS/2 Keyboard, PS/2 Mouse on board
  4. 1 x Joystic, 1 x Line-in, 1 x Line-out, 1 x MIC
  5. 4 x USB 2.0 by cable, 2 x USB 1.1 by cable, 2 x USB 1.1 on board
  6. Memory Stick/Security Digital/Smart Card Reader connectors
  7. 1 x RJ45 LAN port, IrDA TX / RX header, case open function
* The entire materials provided herein are for reference only. GIGABYTE reserves the right to modify or revise the content at anytime without prior notice.
* Advertised performance is based on maximum theoretical interface values from respective Chipset vendors or organization who defined the interface specification. Actual performance may vary by system configuration.
* All trademarks and logos are the properties of their respective holders.
* Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual memory size is less than the stated amount.
All intellectual property rights, including without limitation to copyright and trademark of this work and its derivative works are the property of, or are licensed to,
GIGA-BYTE TECHNOLOGY CO., LTD. Any unauthorized use is strictly prohibited.